| Megger |
: |
- 1000 Volt 2 Nos
- 5000 Volt 1 No
- 6600 Volt 1 Nos
|
| H.V. Tests |
: |
- 0-60 KV AC One each
- 0-5 KV AC One each
- 0-30 KV DC 1 No.
|
| Tan Delta Test set |
: |
1 Nos |
| Surge comparison tester |
: |
0-11 KV, Jabbals Make |
| A.C. Motor testing panel |
: |
150 Amp |
| D.C. Motor testing panel |
: |
100 Amp Thyristerised |
| Balancing Facility |
: |
upto 25 Tons available at next door |
| Micro ohm meter – Digital |
: |
3 Nos. |
| Multi meter – Digital |
: |
5 Nos. |
| R.P.M. meter – Digital |
: |
2 Nos. (one contact type, one non contact type) |
| Sound level meter-Digital |
: |
1 No. |
| Noise detector |
: |
2 No |
| Vibration meter – Digital |
: |
1 No. |
Spring Balance for Brush
Tension measurement |
: |
1 No. |
| High Current injection set |
: |
1 No. 0-500 Amp DC. |
| AC Variable storage Voltage Source |
: |
0-400V,100 Amp. |
| Power Analyzer |
: |
1 Nos |
| Harmonics Analyzer |
: |
1 Nos |
| Polarization Index meter |
: |
1 Nos. |
| Di-Electric Absorption Ratio Tester |
: |
1 Nos. |
| CONNECTED POWER SUPPLY |
: |
75 HP |
| TOOLS & TACKLES |
: |
Handling Facility :
- 20 ton crane-motorized
- 5 ton manual 2 Nos.
- 7.5 Ton crane motorized
- 15 Ton Manual Crane
|
| DESCRIPTION OF IMPORTANT MACHINERY EQUIPMENTS INSTALLED |
| Alternator Rotor winding machine capacity |
: |
upto 20 Ton Rotor |
| Coil Winding machine power driven |
: |
3 Nos.
(Capacity 9 ton, 500 Kgs. & 250 Kgs.) |
| Fixtures for fabrication of diamond shape coils |
: |
|
| Bench Grinder |
: |
|
| Bench drill |
: |
50 mm D – 800 mm L |
| Hand drill |
: |
4 Nos. |
| Hand grinder |
: |
3 Nos. |
| D.C. Welding machine |
: |
500 Amp |
| A.C. Welding machine |
: |
450 Amp |
| Hydraulic pullers |
: |
200 Ton. 1 Nos., 25 TON 1 Nos |
| Mechanical pullers |
: |
8 Nos. |
| Induction Bearing Heater |
: |
1 (I.D. 500mm-Width 100mm) |
| Oven |
: |
L 12 ‘ x H 10 ‘ x W 10 ‘.,35 KW, 0-250 Deg C |
| All necessary workshop tools & tackles. |
|
|
| Brazing facility |
: |
Oxygen-LPG gas cylinders with all required torches. |
| Dynamic Balancing facility |
: |
up to 25 tons, 6 Mt length & Dia 2.5 Mt is available as & when Required in our next door. |
| Hydraulic press |
: |
up to 200 Ton. |
